| Product type designation | RUGGEDCOM RP110NC |
| Product description | Power Injector for PoE, IEEE802.3af + 802.3at |
| The RUGGEDCOM RP110NC provides the flexibility to power remote PoE devices using standard Cat5 cable. In addition to a power injector, the RP110NC has a built-in serial server, designed to bridge legacy serial devices on to an IP network. It offers a single interface capable of supporting RS422, 485 and 232 protocols, and is protocol aware for certain common serial protocols such as DNP and Modbus. Substation Rated IEC 61850-3,IEEE 1613,-40 to +85 °Cel. operating temperature (no fans) Panel or DIN mounting, Lightweight Cast Aluminum Enclosure |
| Transmission rate |
| Transfer rate | 10 Mbit/s, 100 Mbit/s |
| acc. to RS 232 | 300 bit/s ... 115200 bit/s |
| acc. to RS 422/485 | 300 bit/s ... 115200 bit/s |
| Interfaces |
| Number of electrical/optical connections | |
| for network components or terminal equipment / maximum | 2 |
| Number of electrical connections | |
| for network components or terminal equipment | 2 |
| for Power-over-Ethernet / for network components or terminal equipment | 1 |
| for serial interfaces / acc. to RS 232/RS 422/RS 485 / maximum | 1 |
| for power supply | 1 |
| for redundant voltage supply | 0 |
| Type of electrical connection | |
| for network components or terminal equipment | RJ45-Port, 7-pole terminal block |
| for Power-over-Ethernet / for network components or terminal equipment | RJ45-Port |
| for power supply | 5-pole terminal block |
| Supply voltage, current consumption, power loss |
| Supply voltage / 1 / Rated value | |
| Supply voltage / 1 / rated value | 10 ... 60 V |
| Type of voltage / 1 / of the supply voltage | DC |
| Supply voltage / 2 / Rated value | 110 V |
| Supply voltage / 2 / rated value | 88 ... 300 V |
| Type of voltage / 2 / of the supply voltage | DC |
| Supply voltage / 3 / Rated value | |
| Supply voltage / 3 / rated value | 85 ... 264 V |
| Type of voltage / 3 / of the supply voltage | AC |
| Permitted ambient conditions |
| Ambient temperature | |
| during operation | -40 ... +85 °C |
| during storage | -40 ... +80 °C |
| during transport | -40 ... +80 °C |
| Note | A maximum operating temperature of +85 °C is permissible for a duration of 16 hours |
| Relative humidity / at 25 °C / without condensation / during operation / maximum | 95 % |
| Protection class IP | IP40 |
| Design, dimensions and weight |
| Design | compact |
| Width | 56.5 mm |
| Height | 117.5 mm |
| Depth | 95.2 mm |
| Net weight | 1 kg |
| Product feature / conformal coating | optional |
| Mounting type | |
| 35 mm DIN rail mounting | Yes |
| S7-300 rail mounting | No |
| 19-inch installation | No |
| Mounting plate | No |
| wall mounting | Yes |
| Standards, specifications, approvals |
| Standard | |
| for EMC | FCC Part 15 (Class A), EN55022 (CISPR22 Class A) |
| for safety / from CSA and UL | UL 60950-1, CSA C22.2 no. 60950-7 |
| for hazardous zone / from CSA and UL | Hazardous Locations: Class 1 Division 2 |
| Certificate of suitability | EN 61000-6-2, EN 61000-6-10 |
| relating to NEMA | TS 2 |
| CE marking | Yes |
| C-Tick | No |
| IEC 61850-3 | Yes |
