| Surge arrester Type 2 Requirement class C, UC 350V Pluggable protective modules 2-pole, 1+1 circuit for TN-S and TT systems with FRN display, narrow Design |
| Article number | 5SD7422-1 |
| General data |
| Standard | IEC 61643-11: 2011, EN 61643-11: 2012 |
| Product designation | Surge protection device |
| SPD classification / acc. to EN 61643-11 | |
| Test Class I, Type 1 | No |
| Test Class II, Type 2 | Yes |
| Test Class III, Type 3 | No |
| Number of SPD ports | 1 |
| Design of the product | Surge arrester |
| Design of pole | 1+N/PE |
| Designation of the protective paths | L-N, N-PE |
| accessories | 1 x 5SD7428-1 + 1 x 5SD7428-0 |
| Mounting type | DIN rail NS 35 |
| Material / of the enclosure | PBT |
| Size of surge arrester | 1,4 MW |
| Degree of pollution | 2 |
| Overvoltage category / acc. to IEC 61010-1 | III |
| Protection class IP / at connection all terminals | IP20 |
| Shock acceleration | 30 gn |
| Vibrational acceleration / at 5 Hz ... 500 Hz / limited to 2,5 h / per axis | 5 gn |
| Ambient temperature / during operation | -40 °C ... 80 °C |
| Ambient temperature / during storage and transport | -40 °C ... 80 °C |
| Relative humidity / during operation | 5 % ... 95 % |
| Installation altitude / at height above sea level / maximum | 2 000 m |
| Width | 25.4 mm |
| Height | 98 mm |
| Depth | 71.5 mm |
| Net weight | 210 g |
| Electrical data |
| Type of distribution system | TT, TN-S |
| Operating voltage | 240 V AC |
| Continuous operating voltage | |
| between N and PE | 264 V |
| between L and (PE)N | 350 V |
| Load current | 40 A |
| Protective conductor current | 1 µA (255 V AC) |
| Discharge current | |
| at (8/20) µs | 20 kA |
| 1 phase / at (8/20) µs | 40 kA |
| Follow current extinguishing capability | |
| between N and PE | 100 A (264 V a.c.) |
| Short-circuit rating (SCCR) / at 264 V | 25 kA |
| Protection level | |
| maximum | 1.5 kV |
| between N and L | 1.4 kV |
| between PE and N and/or L | 1.5 kV |
| Residual voltage | |
| between L and (PE)N | |
| — at rated value of discharge current / maximum | 1.5 kV |
| — at 10 kA / maximum | 1.3 kV |
| — at 5 kA / maximum | 1.2 kV |
| — at 4 kA maximum | 1.1 kV |
| — at 2 kA maximum | 1 kV |
| between N and PE | |
| — at rated value of discharge current / maximum | 0.5 kV |
| — at 10 kA / maximum | 0.5 kV |
| — at 5 kA / maximum | 0.5 kV |
| — at 4 kA maximum | 0.5 kV |
| — at 2 kA maximum | 0.5 kV |
| Response value of the surge voltage / at 6 kV / at (1.2/50) µs | |
| between N and PE | 1.5 kV |
| Response time | |
| between L and (PE)N | 25 ns |
| between N and PE | 100 ns |
| Settable response factor / of trip current | 1.6 |
| Fuse protection type / at V-shaped connection | 63 A AC (gG) |
| Fuse protection type / for T-connector | 315 A AC (gG) |
| Connections/Terminals |
| Type of electrical connection | Screw terminal |
| Wire stripping length | 16 mm |
| Tightening torque | 4.3 ... 4.7 |
| Wire stripping length | 16 mm |
| Connectable conductor cross-section | |
| for finely stranded conductor | 2.5 ... 16 |
| for rigid conductor | 2.5 ... 25 |
| finely stranded | 2.5 ... 16 |
| AWG number / as coded connectable conductor cross section | 12 ... 4 |
| Design of the thread / of the connection screw | M5 |
| Signal design | Optical, remote signaling contact |
| Indicator/remote signaling |
| Switching function / of the remote-signaling contacts | PDT contact |
| Operating voltage / of the remote-signaling contacts | |
| at AC | 5 ... 250 |
| at DC | 125 V (200 mA DC) |
| Operating current / of the remote-signaling contacts | |
| at AC | 5 mA ... 1 A |
| at DC | 1 A |
| Connection type of remote signaling contact | M2 |
| Connectable conductor cross-section | |
| for remote signaling contacts / for rigid conductor | 0.14 ... 1.5 |
| for finely stranded conductor / for remote signaling contacts | 0.14 ... 1.5 |
| AWG number / as coded connectable conductor cross section / for remote signaling contacts / minimum | 28 |
| AWG number / as coded connectable conductor cross section / for remote signaling contacts / maximum | 16 |
| Tightening torque / for remote signaling contacts | 0.25 N·m |
| Wire stripping length / of the cable / for remote signaling contacts | 7 mm |
| NEMA/UL - Data |
| Type of surge protective device (SPD) / according to UL | 4CA |
| Type of distribution system / according to UL | 1 |
| Type of distribution system | TT, TN-S |
| Designation of the protective paths / according to UL | L-N, L-G, N-G |
| TOV behavior | |
| at TOV test voltage (L-N) | 415 V AC (5 s / withstand mode) / 440 V AC (120 min / safe failure mode) |
| at TOV test voltage (N-PE) | 1200 V (200 ms / withstand mode) |
| Measured Limiting Voltage (MLV) / between L and Ground (GND) | 2.08 kV |
| Measured Limiting Voltage (MLV) / between L and N | 2 kV |
| Measured Limiting Voltage (MLV) / between N and Ground (GND) | 0.95 kV |
| Maximum Continuous Operating Voltage (MCOV) / between L and Ground (GND) | 350 V |
| Maximum Continuous Operating Voltage (MCOV) / between L and N | 350 V |
| Maximum Continuous Operating Voltage (MCOV) / between N and Ground (GND) | 264 V |
| Leakage current / according to UL | 20 kA |
| Leakage current / according to UL | 20 kA |
| Leakage current / according to UL | 20 kA |
| Sequential current | |
| between N and Ground (GND) / according to UL | 200 A (264 V AC) |
| AWG number / as coded connectable conductor cross section / for remote signaling contacts / according to UL / minimum | 30 |
| AWG number / as coded connectable conductor cross section / for remote signaling contacts / according to UL / maximum | 14 |
| Installation altitude above sea level / according to UL | 6 562 ft |
| Gross weight [lb] / according to UL | 0.51 lb |
| Net weight [lb] / according to UL | 0.46 lb |
| Combustibility class acc. to UL 94 | V0 |
| Standards / according to UL | UL 1449 edition 4 |
| Operating voltage / of the remote-signaling contacts / according to UL | 125 V |
| Operating current / of the remote-signaling contacts / at AC / according to UL | 1 A |
| AWG number / as coded connectable conductor cross section / according to UL / minimum | 14 |
| AWG number / as coded connectable conductor cross section / according to UL / maximum | 2 |
